Benefits
The C47 offers a premium electric operated cassetted blind for situations where durability and functionality are required.
Our square and rounded cassette headboxes look stylish and suits a range of settings.
Side channels hold the fabric in place as well as limit the level of light entering the room.
The quiet and reliable motor is housed within the barrel and further protected by the robust aluminium headbox housing.
The fabric is locked into the barrel and bottom bar and will give years of trouble-free use.
For easy repair or replacement of blind cover, the fabric is located in the groove which allows it to be slid out sideways.
The C47 electric cassette blind benefits from a reduced installation time due to our goalpost installation method. The side channels are connected to the headbox via special end plates, creating a goalpost-shaped frame. The frame is then installed via the side channels.
Options
- Square or rounded headbox
- Black or white hardware
- Available without side channels see product C27-90/120
- Remote and/or group control systems in place of a single switch
- Tracker fabric retaining system
- Available in any RAL colour
Specification
YewdaleDefiant® C47-90/120 electric cassetted blind with side channels as manufactured by Yewdale, +44 (0)1268 570900. Flame retardant fabric from the YewdaleDefiant® range, locked into grooved 53/70mm aluminium barrel along with aluminium bottom bar as standard. 230v AC Yewdale motor is housed within black/white aluminium cassette with side channels and bottom bar.
Find this product on NBS Source
Cassette size (HxD): 105 x 95mm**140 x 120mm
Barrel size Ø: 53mm**53/70mm
Side channel size (WxD): 55x 13mm**55x 13mm
Min Width: 570mm
Based on fabric weight of 400g/m², e.g. Dart. Larger sizes may be possible with lighter/thinner fabrics. Sizes shown in millimetres unless otherwise specified.
| C47-90 recess size width minus 2mm & drop minus 2mm = Blind size minus 46mm = fabric width |
C47-120 recess size width minus 2mm & drop minus 2mm = Blind size minus 46mm = fabric width | C47-90T recess size width minus 2mm & drop minus 2mm = Blind size minus 79mm = fabric width | | C47-120T recess size width minus 2mm & drop minus 2mm = Blind size minus 79mm = fabric width |
|
